Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser to send you alerts when your car is taken or damaged.
The installation of a Ghost immobiliser can be done by a certified technician. It is essential to have the right equipment and heat shrink tubing.
Getting Started
Unlike physical theft protection devices like wheel locks or car alarms, ghost immobilisers guard your vehicle without the need of LED indications or key fobs. They connect directly to the ECU CAN data network and can only be activated after entering a PIN code. This gives a greater level of security against key hacking, ECU swapping and cloning.
In the end, installing a ghost immobiliser Birmingham has to be done with great agility and precision. It's like walking through a minefield. A single mistake could cause serious damage to the circuits of your vehicle. To avoid this, it's essential that you understand the installation process and prepare your vehicle for the installation process.
You will need to remove interior panels from the vehicle in order to make room for the immobiliser. Once you've found the perfect place to hide it and you have it, use cable ties to secure it. Then, tidy up your wiring by tying loose wires down and using insulation tape to cover any exposed connections. This will help to reduce the risk of accidental short circuits as well as improving aesthetics and reducing the likelihood of tampering by thieves.
Find a reliable source of 12V power, as well as a grounding source for the ghost immobiliser. Once you've located these and tested the power wires using a multimeter, to ensure they're delivering a consistent voltage. Connect the CAN H and the CAN L wires from the immobiliser with the grounding and power points.
After you've made all the necessary connections It's crucial to double-check the connections and check the immobiliser for signs of corrosion or other damage. The process of entering a PIN and launching the vehicle is a great method to test the system. This should be part of your daily routine as it will allow you to detect any issues that may arise early. Regular testing will help increase the longevity of your device, and keep it running at its peak.
Preparing the vehicle
Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram is crucial for finding the correct wires, establishing precise connections, and ensuring safety. A multimeter can be used to check electrical values and guarantee security. Insulation tape and cable tie can be used to secure connections and protect them from tampering. Additionally, a user's guide will provide specific directions tailored to your Ghost Immobiliser model.
Once installed the ghost immobiliser will prevent unauthorised engine start by requiring the owner to enter a unique PIN sequence through existing buttons in the steering wheel or on the centre console. The code can be changed at any time by the owner either by hand or remotely using an app on mobile. The device is also quiet and is undetectable by thieves because it doesn't emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by the ECUs and blocks the engine from starting when a false signal is detected. The system is weatherproof and tamper-proof. It does not have keys or LED indicators to attract thieves' attention.
It can be placed behind or in a less visible area to ensure that it isn't visible to thieves, and does not interfere with vehicle performance. It is also possible to put it in a small box which makes it less likely to be discovered during the test drive by unscrupulous salespeople for cars.
Its low-profile operation and integration with the vehicle's CAN bus network make it a powerful deterrent to modern methods of theft, including key cloning and signal relay attacks. The system can be combined with other security measures to create a formidable barrier that can thwart even the most persistent thieves. ghost immobiliser review and more insurance companies suggest or require ghost immobilisers as they can cut down on the cost of insurance.
Making Connections
In contrast to traditional security systems that can be heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle has been switched on. They also stop high tech methods of stealing vehicles, such as OBD hacking. They can also be installed without leaving permanent marks on your car, making them an excellent option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and modern solutions to prevent car theft. It utilizes the CAN data network to deactivate your engine and generates a PIN code that only you know, so it's difficult for criminals to recognize. It is compatible with various automobiles, and it can work with a variety of features already installed including car alarms, steering wheel locks, GPS trackers and door lock bypass.
If you decide to go with a Ghost immobiliser, be sure to check the wiring diagram for your specific car model to identify the wires that require connecting. Double-check their locations to ensure they are exact, and label them or tape them to help remember them. You'll also need to locate a consistent power source (12V) for the system and a grounding. Once you have the necessary components, you can start connecting them to complete the installation.
If the ghost immobiliser is connected to your CAN bus, it will stop your vehicle from starting until you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU hacking or key cloning and other techniques of theft. In addition, it could be used in conjunction with other Thatcham-approved security devices, like alarms and tyre clamps to give your vehicle an even greater level of protection.
As the UK automotive aftermarket industry grows and expand, so do the options to secure your vehicle. There are many ways for thieves to get into your car and steal it, so it's important to take every precaution to prevent it from being stolen. Ghost immobilisers are an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU which stops the engine from running until a specific PIN code is entered. This makes it difficult for thieves to copy your key fob to start your vehicle, and even difficult to disable the system by hacking its electronics.
Ghost Immobilisers can also be used with GPS tracking devices to help you locate your vehicle in the event that it's stolen. This isn't an everyday feature in security products that are available from the market however it's a great option to increase your security and provide peace of mind knowing that your vehicle is always secure.
The Ghost-II immobiliser is not just a source of an enhanced security, but also a pleasant experience for the user by not having to use additional key fobs or devices. It is simple and user-friendly PIN code entry system that works seamlessly with your everyday routine. In addition, it offers options for deactivation and features that let you temporarily disable the immobiliser valet parking and servicing.
Before you begin the installation process, you should be familiar with your vehicle's wiring and prepare the tools. A basic set will enable you to make precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat shrink tubing are also crucial to protect connections from short circuits, while cable tie is a great way to secure the wiring in the right place. It is also essential to work in a space that is well-lit and wear safety gear when using electrical tools and components.
After you've completed the installation, you should test the Ghost immobiliser to ensure that it's functioning properly. First, you need to try to start the vehicle without entering the PIN code. If this fails then you'll need to try again and check the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a hidden device that is not able to be detected by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA acknowledged and approved by a few insurance companies, making it a cost-effective investment that will provide you with the peace of mind that you want.